Low strain test that evaluates shaft continuity and estimates pile length from the reflection of the stress wave.
Request a proposalDue to its low cost and speed, integrity testing allows verifying a large percentage of the elements on a project, not just a sample. A blow with an instrumented hammer generates a wave that reflects off cross section changes and off the pile tip.
The record identifies signals consistent with necking, bulging, discontinuities or a length different from the one expected, and guides the decision on which elements deserve further investigation.
The test evaluates the integrity of the structural element. It does not measure load capacity: when the doubt concerns resistance, the appropriate verification is dynamic load testing or static load testing.
Inmobiliario
Minería
Energía
Industrial
Infraestructura
Saneamiento
Logística
Petróleo y gas
Agroindustria
A team of specialist engineers with a combined 242 years of experience in geotechnics.
Presidente del Consejo
Expresidente de la ABMS (Asociación Brasileña de Mecánica de Suelos e Ingeniería Geotécnica)
70 años de experiencia en geotecnia
CREA/CONFEA 1404864105
Ingeniero civil geotécnico
Consejero del CREA-MG (órgano regional de referencia del sistema brasileño de regulación y fiscalización de la ingeniería)
40 años de experiencia en geotecnia
CREA/CONFEA 1405047593
Director técnico
Ingeniero civil geotécnico
30 años de experiencia en geotecnia
CREA/CONFEA 1404815503
Director ejecutivo
Ingeniero civil geotécnico
26 años de experiencia en geotecnia
CREA/CONFEA 1416959840
Ingeniera civil geotécnica
11 años de experiencia en geotecnia
CREA/CONFEA 1417059923
Ingeniero civil geotécnico
10 años de experiencia en geotecnia
CREA/CONFEA 1416378065
Gerente de Negocios y Operaciones
Ingeniero civil geotécnico
3 años de experiencia en geotecnia
CREA/CONFEA - 1423584910
Gerente comercial
Ingeniera civil geotécnica
9 años de experiencia en geotecnia
Ingeniero civil geotécnico
5 años de experiencia en geotecnia
CREA/CONFEA 1420099566
Ingeniero civil geotécnico
6 años de experiencia en geotecnia
CREA/CONFEA 1423765745
Ingeniera civil geotécnica
6 años de experiencia en geotecnia
CREA/CONFEA 1421107996
Ingeniero civil geotécnico
7 años de experiencia en geotecnia
CREA/CONFEA 1418234362
Ingeniero civil geotécnico
2 años de experiencia en geotecnia
CREA/CONFEA 1422269183
Ingeniera civil geotécnica
1 año de experiencia en geotecnia
CREA/CONFEA 1423530080
Ingeniero civil geotécnico
6 años de experiencia en geotecnia
CREA/CONFEA 1422452557
Ingeniera civil geotécnica
3 años de experiencia en geotecnia
CREA/CONFEA 1421602407
Ingeniera civil geotécnica
2 años de experiencia en geotecnia
CREA/CONFEA 1422908925
Ingeniera civil geotécnica
2 años de experiencia en geotecnia
Ingeniero civil geotécnico
2 años de experiencia en geotecnia
Ingeniera civil geotécnica
1 año de experiencia en geotecnia
We have a structure specialized in foundation quality control, the largest technical team in the sector and more than 60 years of tradition from Grupo Gontijo.
We mobilize proprietary equipment and instrumentation for projects in any country in Latin America.
Calibrated instrumentation and rigorous maintenance across the entire fleet.
Dedicated geotechnical engineers, from planning through to the report.
The experience of Grupo Gontijo, since 1965, applied to every test.
Technical interpretation and recommendations applicable to the project.
Digital record of parameters and complete traceability of the test.
Direct measurement of a deep foundation load capacity through the gradual application of load and the recording of settlement at each stage.
Learn more →The same static test, with strain gauges along the shaft to separate the lateral friction of each soil layer from the end bearing resistance.
Learn more →
Controlled hammer blows with force and velocity measurement on the pile, interpreted through wave equation theory.
Learn more →
Bidirectional load cell installed inside the pile that applies load simultaneously upward and downward, without a reaction structure at the surface.
Learn more →
Geoteste proprietary system for applying blows in dynamic testing, with remote actuation and digital recording of every parameter.
Learn more →
Load applied on a rigid plate resting on the ground to obtain the relationship between pressure and settlement of the surface soil.
Learn more →Rely on someone who knows the subject.
Talk now with a specialist and request a technical proposal tailored to your project.
Talk to an engineer